Why GE PB930 surface units are cycling off and on frequently?
If the surface units on your GE Ranges are frequently cycling off and on, it may be due to improper cookware. Use only flat cookware to minimize cycling.
How to remove scratches on GE PB930 Ranges cooktop glass surface?
Scratches on the cooktop glass surface of your GE Ranges are generally not removable. However, tiny scratches may become less visible over time with regular cleaning. To prevent scratches, use recommended cleaning procedures and ensure cookware bottoms are clean and smooth.
Why is my GE Ranges oven temperature too hot or too cold?
If your GE Ranges oven temperature is too hot or too cold, it may need adjustment. Please refer to the Special Features section.
How to make GE PB930 oven racks easier to slide?
If the oven racks on your GE Ranges are difficult to slide, apply a small amount of vegetable oil to a paper towel and wipe the edges of the oven racks with the paper towel. Do not spray with Pam® or other lubricant sprays.
Why doesn't my new GE PB930 oven cook like my old one?
Your new GE Ranges oven may cook differently because it uses a different cooking system than your old oven. Carefully monitor recipe times and temperatures for the first few uses. If you believe the oven is too hot or cold, you can adjust the temperature to match your cooking preferences. Note: This adjustment affects Bake and Convection Bake temperatures only, not Convection Roast, Broil, or Clean.
How to fix GE PB930 oven light that does not work?
If the oven light in your GE Ranges isn't working, try tightening or replacing the bulb.
How to get the display to show “SF” on GE Ranges?
If you're unable to get the display to show “SF” on your GE Ranges, the BROIL HI/LO and BAKE pads must be touched at the same time and held for 3 seconds.
What to do if GE PB930 Ranges surface units do not work properly?
If the surface units on your GE Ranges aren't working properly, first check if a fuse in your home has blown or the circuit breaker has tripped and replace the fuse or reset the circuit breaker. Also, ensure that the cooktop controls are correctly set for the surface unit you're using.
Why GE PB930 Ranges oven will not steam clean?
If your GE Ranges oven won't steam clean and the display flashes HOT, allow the oven to cool to room temperature before resetting the controls. Also, ensure the oven controls are properly set. Please refer to the Using Steam Clean section.
Why GE PB930 oven will not self-clean?
If your GE Ranges oven won't self-clean, it could be because the temperature is too high. Allow the oven to cool down before resetting the controls. Also, ensure that the oven controls are properly set. Please refer to the Cleaning the Oven section.
To Next Page
General
