Installation Instructions
INSTALLING THE REFRIGERATOR (cont.)
13] REMOVETHE REFRIGERATORDOORS
_'l Openthe refrigerator doors.
[] Removethe two front caps with a flat-head screwdriver.
[] Removethe three screwson top with a Phillips-head
screwdriver.
[_] Disconnect all electrical connectors.
\
r_ To disconnect the water coupling, push in on the grag
coupling and pull out the tubing.
f
Gray
Coupling
Removethe two ground wires with a Phillips-head
screwdriver,one on each side.
Removethree 10 mm hex-head bolts (right and left).
-& CAUTION:When the bolts are removed,
the door mag fall and cause personal injurg and/or
damage to the door itself.
[] REMOVETHE REFRIGERATORDOORS(cont.)
[] Liftthe door straight up to remove.
ITI Removethe two bolts using a 3/16"Allen wrench
and two Phillips-headscrews from the center hinge.
Setthe hinge,bolts and screw aside.
Fo
i
[] REPLACINGTHE REFRIGERATORDOORS
[] Installthe center hinge on eachside.
Lowerthe refrigerator door onto the center hinge pin.
Ensurethat the plastichinge pinthimble ison the center
hinge pin or insidedoor hinge pin hole located in the
bottom ofthe door.
I j jr
L-.__f .j./
Fc1 Securelgtape the door shut with maskingtape
or havea second person support the door.
28
To Next Page
Loading...
