GE Profile PFSS6PKXBSS

Installation Instructions
[] TURN ON THE WATER SUPPLY
Turnthe water on at the shutoff valve (housewater
supplg)and checkfor ang leaks.
1_1 PLUG IN THE REFRIGERATOR
Seethe grounding information attached to the power
cord.
I_l LEVEL THE REFRIGERATOR
The leveling legs have 2 purposes:
1) Leveling legs adjust so the refrigerator is
firmlLl positioned on the floor and does not
wobble.
21 Leveling legs serve as o stabilizing broke
to hold the refrigerator securely in position
during operation and cleaning. The leveling
legs also prevent the refrigerator from
tipping.
_'1 Turn the leveling legs clockwise to raise
the refrigerator, counterclockwise to lower it.
Flat-HeadScrewdriver
_ALCAUTION: To avoid possible
personel injurg or propertg demege,
the leveling legs must be firmlg touching
the floor.
[_] LEVELTHE REFRIGERATORDOORS
Remember o level refrigerator is necessorLl for
getting the doors perfectlLl even. If Llou need help,
review the previous section on leveling the
refrigerator.
When
the left
dooris
lowerthan
the right
door
,.y
Adjustment
point \
Adjustment
point
When
the leftdoor
ishigher
than
theright
door
I_] If Llou open the freezer door, you con see
the center hinge.
rB1 Insert the supplied 4 mm Allen wrench into
the shaft of the center hinge.
[] Adjust the height bLl turning clockwise
or counterclockwise. When you turn
counterclockwise, the door will move up.
FD-]After adjusting the doors, insert the supplied
fastener ring using o pair of pliers in the gap
between the hinge grommet and the center
hinge. The number of fastener rings you will
need to insert depends on the gap.
NOTE: Four fastener rings ore enclosed with
the refrigerator. Thickness of each fastener ring
is 0.04".
33