Installation Instructions
INSTALLING THE REFRIGERATOR (cont.)
I_l LEVEL THE FREEZER DOOR
[] Locate the height adjuster in the freezer door.
Slightly loosen the four Phillips-head screws
from the door on each side (right and left).
[] Loosen the controller screw with a Phillips-head
screwdriver to adjust the level.
LEVEL THE FREEZER DOOR (cont.}
I_] Find the best position to align the door slope.
Example:Theslopeisabout2 mmas
shownbelow.
Reference_)
Plane
Rotatetheheightadjusterto+2.0to reduce
thedoorslope.
I-D-I After adjustment, tighten all the screws.
SET THE CONTROLS
Set the controls to the recommended setting.
RECOMMENDED CONTROL SETTINGS I
© ©
REMOVE PACKAGING
A) Remove all tape, foam and protective
packing from shelves and drawers.
34
To Next Page
Loading...
