– 50 –
16. Using rubber gloves to protect your hands,
carefully grasp the bottom of the insulation,
that covers the side of the range, and tuck the
insulation up under the left side wire insulation
retainer.
17. Remove the 1/4-in. hex-head screw and the
ground wire from the bake element.
18. Remove the 1/4-in. hex-head screw from the left
side of the bake element.
19. Peel back the tape from the oven liner.
(Continued next page)
Tape
20. Using a small fl at blade screwdriver, pry the left
side of the retainer away from the element.
22. Grasp the bake element on both sides and
gently pull it toward you as you remove it from
the element tray.
21. Pull the retainer to the left, and disengage the
tab from the slot in the element tray.
Element Tray
Tab
Note:
• When installing the air tunnel, make sure the
2 bottom legs are hooked into the slots in the
range frame.
• Upon reassembly, ensure displaced insulation
around oven and components is returned to its
original position.
To Next Page
Loading...
