– 61 –
20. Carefully pull the liner out from the range.
17. Remove the six T-20 Torx screws that attach the
front of the oven liner to the oven frame.
18. Remove the two T-20 Torx screws that attach
the back of the oven liner to the range.
19. Using a fl at-blade screwdriver, push upwards
while pushing forward on the 2 metal hooks and
disengage them from the back wall of the range.
Note: If removing upper oven liner to access the
lower oven door lock assembly, continue to the
following steps.
Remove
Remove
Disconnect
Hook
Hook
21. Disconnect the 2 wires from the bake element.
22. Remove the 1/4-in. hex-head screw and the
ground wire from the bake element.
23. Remove the 1/4-in. hex-head screw from the left
side of the bake element.
24. Grasp and lift the back of the bake element pan
and remove it from the tabs located at the front
of the range.
Door lock assembly shown below with liner removed
To Next Page
Loading...
