Installation Instructions
r_ PLUG IN WASHER
[_] WASHER STARTUP
Press the POWER button.
POWER
NOTE: If the washer has been exposed to
temperatures below freezing for an extended
period of time, allow it to warm up before pressing
POWER. Otherwise, the displag will not come on.
The washer is now readg for use.
SERVICING
WARNING- LobeJoUwiresprior
to disconnection when servicing controls.
Wiring errors can cause improper and
dangerous operation after
servicing/installation.
For replacement parts and other information,
refer to the Owner's Manual for servicing phone
numbers.
16
To Next Page
Loading...
