Before you call for service...
Troubleshooting tips
Save time and money! Reviewthe charts on the following
pages first and you may not need to call for service.
Possible Causes What ToDo
A fuse in your home may be • Replace fuse or reset circuit breaker.
blown or the circuit breaker
tipped.
Power surge. • Unplug the microwave oven, then plug it back in.
Plug not fully inserted into wall • Make sure the g-prong plug on the oven is fully inserted
outlet, into wall oufle_
Door not securely dosed. • Open the door and close securely.
Door not securely dosed. • Open the door and close securely.
STARTbutton not pressedafter • PressSTART
entering cookingselection.
Another selection entered • Press CLEAR/OFF.
already in oven and CLEAR/OR:
button not pressed to cancel it.
Cooldng time not ente_d after • Make sure you have entered cooking time after pressing
p_ TIME COOl(. TIMECOOK.
CLEAP,,iOFFwaspressed • Reset cooking program and press START
accidentally.
Food weight not entered after • Make sure you have entered food weight after selecting
selecting AUTO DEFROSTor AUTO DEFROSTorFASTDEFROST
FASTDEFROST
Food type not entered after • Make sure you have entered a food type.
Wes_ AUTO COOK.
The control has been locked. • Press and hold O.EA/_gFFfor about 3 seconds
to unlock the control.
The temperature in,de the • This is normal.
oven is greater than 200 °F.
One of the sensor cooking • These features will not operate when the oven is hot.
pads was pressed when the
temperature inside the oven
was greater than 200°F,
The cooktop light is located • This is normal.
below the oven floor. When
light is on, the heat itproduces
,make the oven floor get warm.
....:: Youhavetriedtochange •Manyoftheoven'sfeaturesarepresetand
the power level when it is cannot be changed.
not allowed.
_ i_ _ _ Oils on the stainless steel cavity • This is normal.
'ft_iIUf_I _#i Mter _ng are burning off after using the
• e_ake _te Bake feature the first few times.
30
To Next Page
Loading...
Need help?
General