GE PVM1790 - Eeeeeeeeeee; Wee; Parts Included; Damage - Shipment;Installation

Installation Instructions
DAMAGE - SHIPMENT/
INSTALLATION
¢ If the unit is damaged in shipment, return
the unit to the store in which it was bought for
repair or replacement.
« If the unit is damaged by the customer, repair or
replacement is the responsibility of the customer.
« If the unit is damaged by the installer (if other than
the customer], repair or replacement must
be made by arrangement between customer
and installer.
PARTS INCLUDED
ADDITIONAL PARTS
PART QUANTITY
Top Cabinet
TOP CABINET TEMPLATE Template
1
PARTS INCLUDED
HARDWARE PACKET
Rear Wall
Template
REAR BVELLOTEMPLATE
i
neta Installation
struc Instructions
PART QUANTITY
Wood Screws 2
(Yar x 2”)
Toggle Bolts (and 4
wing nuts} (4” x 3”)
Self-aligning Machine 3
Screws {14-28 x 34) 2 (JVM1790 only)
Separately
Packed
Grease
Filters
Self-aligning Machine 1 (JVM1790 only}
Screw (147-28 x 254”)
Nylon Grommet 2
(for metal cabinets)
Exhaust Adaptor |
Damper |
Metal Screws 1 black
fmt (iA x 4") ? bronze
You will find the installation hardware contained
in a packet with the unit. Check to make sure you
have all these parts.
NOTE: Some extra parts are included.