GE RM94904 User Manual

Prog ramming For TV
1. Manually turn
on the TV.
2. Press and hold
the SETUP
button until the
INDICATOR LIGHT
lights, then release
the SETUP
button.
3. Press and release the
TV button (the
INDICATOR LIGHT will
blink then remain lit).
4. Find the three digit
code for your TV in
the code list in the
back of this book
and enter it using the
Number Buttons.
After your code
is entered, the
INDICATOR LIGHT
will turn off.
5. Aim the remote at
your TV and press
the POWER button. Your TV should turn off.
Note: If your TV does not respond, try all the codes for your
brand. I f the codes do not work, or your brand is not listed,
try the Code Search method on page 8. NOTE: Sometimes
a code listed will only include limited functions. Try other
codes which may include more functionality.
6. With your TV on, press
CHA NNEL UP. If the TV
responds, no further
programming is
required.
7. Enter your code here
for easy reference.
BLINK
OFF
TV CODE
4
94904 Revised Size 2/25/02 3:57 PM Page 5

GE RM94904 Specifications

General

Brand	GE
Model	RM94904
Category	Universal Remote
Language	English