CONNECTING THE AUXILIARY TANK FOR MODEL PNRV18
I, Turn off tile water supply m 1tie Reverse Osmosis system by
closing (clockwise rotation) tile water supply valve (Hg. 9). Shut
off the waler from the Reverse Osmosis tank of tile posttiher hy
closing Ihe RED tank shutoff valve (Fig. 10). Lift tile lever oil Ihe
RO water faucet located oil Ihe sink or counlertop. Let water
drain from the s_tem. (lose file faucet when file water has
stopped flowing.
H H
H H
H H
H H
!! H
valveWatcrsuppl)_
To drain
Fig. 10
2 Unscrew the 3/8" tubing from the mp of the postfilter. Using
one of the 3/8" tee fillings from the parts hag, connect the
filling m the end of the tube that was atlached m the inlet of
lhe poslfilten Using/tie 12" section of the 3/8" orange robing
(provided), connect the lee tilting m the posffilter (Fig. 11).
3. Remove the icemakerstoragetankfkom its packing. Cormect
ltze tank adapler to lhe tank. Use Teflon" tape on the threads.
4. Connect tile tank m dm lee tilting using the 6 ft. length of
orange robing.
Fig. 11
Installation
with tee
To Next Page
Loading...
Need help?
General
