APPENDIX D: MISCELLANEOUS REVISION HISTORY
T35 TRANSFORMER PROTECTION SYSTEM – INSTRUCTION MANUAL D-3
D
Table D-3: Major changes for T35 manual version AE3 (English)
Table D-4: Major changes for T35 manual version AE1 (English)
Table D-5: Major changes for T35 manual version AC1 (English)
--- Updated Contact Inputs from 96 to 120 and Contact Outputs from 64 to 72 in Product Description in chapter 2 and FlexLogic
operands table in chapter 5
3-36 Updated RS422 and Fiber Interface Connection figure for the clock channels (from 7a and 7b to 1a and 1b)
3-67 Added Connect to a D400 Gateway section
4-43 Updated LED Labelling instructions for the new Front Panel Label Designer
4-50 Added Standard Front Panel section for labelling LEDs and pushbuttons
5-106 Added USB Port section to enable/disable the USB port on the graphical front panel
5-120 Updated User-programmable Pushbuttons section as per specifications
5-154 Updated Breakers section as per specifications
5-159 Updated Disconnect Switches section as per specifications
9- Added Theory of Operation chapter in order to add Saturation Detector section
10-5 Added Convert Device Settings section
10-7 Added Copy Settings to Other Device section
10-15 Added Replace Front Panel section for retrofit with the new graphical front panel
Page Description
--- General revision
2- Updated order codes
9- Added Theory of Operation chapter in order to add Saturation Detector section
10-5 Added Copy Settings to Other Device section
Page Description
--- General revision
--- Added routable GOOSE content in chapters 2 and 5
3-36 Updated RS422 and Fiber Interface Connection figure for the clock channels (from 7a and 7b to 1a and 1b)
4- Added Engineer content
5- Updated IEC 61850 content
A- Updated FlexAnalog table for most UR products
Page Description
--- General revision. Added online help and updated generic online help.
--- Deleted EAC logo from title page and deleted EAC certification from Approvals specifications because document not
translated into Russian
--- Updated Breaker Arcing Current content, including FlexLogic operands table, settings, logic diagram, actual values, Modbus
memory map
--- Updated transformer Percent Differential element (for CT Saturation) to include 1-out-of-3, including in specifications,
FlexLogic operands, settings, and logic diagram
--- Added Restricted Ground Fault element to description, specifications, FlexLogic operand table, settings, actual values,
FlexAnalog table, Features per Product table, Modbus memory map, IMD table
--- Added Transformer Thermal Inputs content to settings, actual values, features per product table, Modbus memory map, IMD
tables
--- Added Phase Instantaneous Overcurrent (IOC) content to description, specifications, FlexLogic operand table, settings,
features per product table, Modbus memory map, IMD tables
--- Added Ground Instantaneous Overcurrent (IOC) content to description, specifications, FlexLogic operand table, settings,
features per product table, Modbus memory map, IMD tables
--- Added Transformer Hottest-Spot temperature, Transformer Aging Factor, Transformer Loss of Life content to description,
specifications, FlexLogic operands table, actual values, FlexAnalog table, Modbus memory map, IMD tables
Page Description
To Next Page
Loading...
