GE VersaMax IC200PWR002 - Page 143

6-8 VersaMax Modules, Power Supplies and Carriers GFK-1504N
6
IC200ERM001
Expansion Receiver Module, Isolated
Connectors
The Expansion Receiver has two 26-pin female D-shell expansion ports. The
upper port receives the cable from an Expansion Transmitter or upstream
Expansion Receiver Module. The lower port is used to daisy-chain the
expansion cable to the next expansion rack or to attach the terminator plug at
the last rack. The Expansion Receiver must always be installed in the leftmost
position of the rack (slot 0).
5
0
7
6
4
1
3
2
ERM001
PWR
EXP RX
SCAN
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
EXP 1
EXP 2
Expansion Rack
Selection Switch
LEDs
Expansion Port for
Incoming cable
Expansion Port for
Continuing Cable or
Termination Plug