8-8 VersaMax Modules, Power Supplies and Carriers User's Manual GFK-1504N
8
IC200MDL330
Output Module, 120 V AC 0.5 A, Isolated 16 Points
Module Specifications
Module Characteristics
Isolation:
User input to logic (optical)
and to frame ground
Group to group
250 V AC continuous; 1500 V AC for 1 minute
250 V AC continuous; 1500 V AC for 1 minute
250 V AC continuous; 1500 V AC for 1 minute
One LED per point shows individual point on/off state
OK LED indicates backplane power is present
Backplane current
5 V output: 140mA maximum
85 to 132 V AC (47 to 63Hz), 120 V AC nominal
Refer to associated diagrams
Compatibility
HW,FW vers.
FW release
2.11 1.0 2.2
Output Characteristics
85 to 132 V AC (47 to 63Hz), 120 V AC nominal
Load current 10mA minimum per point
0.5A maximum per point
5.0A for one cycle (20ms) maximum inrush
Less than 2mA at 132 V AC
On response time
Less than ½ cycle, maximum
Less than ½ cycle, maximum
Snubber and MOVs (each output)