1-8  VersaMax Modules, Power Supplies and CarriersUser Manual  GFK-1504N 
 
1 
Power Supplies 
An AC or DC Power Supply module installs directly on the CPU or NIU. The 
power supply provides +5V and +3.3V power to the modules in the station. 
Additional power supplies can be installed on special booster carriers, if 
needed, for systems where the number of modules creates the need for a 
booster. The AC or DC power supply on the CPU or NIU and the power supply 
that resides on the Booster carrier must share the same external power source. 
24 VDC,  11  W 
POWER SUPPLY 
 
Available Power Supplies and Carrier 
The following table lists the available VersaMax power supplies and carrier. 
24VDC Expanded 3.3V Power Supply 
120/240VAC Expanded 3.3V Power Supply 
12VDC Expanded 3.3V Power Supply 
Power Supply Booster Carrier 
 
Power supplies are described in chapter 3 of this manual.