GE VersaMax IC200PWR002 - Page 242

8-32 VersaMax Modules, Power Supplies and Carriers User's Manual GFK-1504N
8
IC200MDL743
Output Module, 5/12/24 V DC Negative Logic 0.5 A, 16 Points
Module Specifications
Module Characteristics
Points 1 group of 16 outputs
Module ID
FFFF8080
Isolation:
User input to logic (optical)
and to frame ground
Group to group
Point to point
250 V AC continuous; 1500 V AC for 1 minute
Not applicable
None
LED indicators One LED per point shows individual point on/off state
FLD PWR LED indicates field power is present
OK LED indicates backplane power is present
Backplane current
consumption
5 V output: 70 mA maximum
External power supply:
5 V DC-TTL mode
12/24 V DC mode
+4.75 to +5.25 V DC, +5 V DC nominal
+10.2 to +30 V DC, +12/24 V DC nominal
Thermal derating
No derating required.
Compatibility
Cimplicity
ME
Versa
Pro
Control
90
CPU
001
CPU
002
CPU
005
CPU
E05
DBI
001
EBI
001
GBI
001
PBI
001
HW,FW vers.
FW release
2.11 1.5 2.4
AA
1.0
AA
1.5
AA
2.1
AA
2.1
AA
1.1
AA
1.0
AA
1.0
AA
1.0
Output Characteristics
Output voltage:
5 V DC-TTL mode
12/24 V DC mode
+4.75 to +5.25 V DC, +5 V DC nominal
+10.2 to +30 V DC, +12/24 V DC nominal
Output voltage drop:
5 V DC-TTL mode
12/24 V DC mode
0.4V maximum
0.3V maximum
Load current:
5 V DC-TTL mode
12/24 V DC mode
25mA maximum
0.5A at 30 V DC maximum (resistive)
2.0A inrush maximum for 100ms
Output leakage current 0.5mA at 30 V DC maximum
On response time
Off response time
0.2ms maximum
1.0ms maximum
Protection (each output)
No internal fuse