GE VersaMax IC200PWR002 - Page 363

GFK-1504N Chapter 11 Analog Output Modules 11-3
11
IC200ALG320
Analog Output Module, 12 Bit Current, 4 Channels
Module Specifications
Module Characteristics
Channels 4 single-ended, one group
Module ID
FFFF9440
Isolation:
User input to logic (optical) and to
frame ground
Group to group
Channel to channel
250 V AC continuous; 1500 V AC for 1 minute
Not applicable
None
LED indicators FLD PWR LED indicates field power is present
OK LED indicates backplane power is present
Backplane current consumption
5V output: 50mA maximum
Thermal derating
Refer to associated diagram
Configuration parameter
Output default
Diagnostics
Loss of User Side Power
Compatibility
PME programming
software
CPU
001
CPU
002
CPU
005
CPU
E05
DBI
001
EBI
001
GBI
001
PBI
001
HW, FW vers.
FW release
All
AA
1.0
AA
1.5
AA
2.1
AA
2.1
AA
1.1
AA
1.0
AA
1.0
AA
1.0
External Power Supply
Recommended range
+18 to +30 V DC (including ripple)
Current consumption at recommended
range
160mA max (including load current)
12V operation range
9.6 to 15 V DC, 12 V DC nominal (including ripple)
Current consumption at 12V range
240mA max (including load current)
Output Characteristics
Output current
4 to 20mA
Load characteristics:
Resistive
Capacitive
Inductive
0 to 1250 Ω maximum
††
0.1µF maximum
0.5H maximum
Accuracy at 25 °C
†
Accuracy at 0 to 60 °C
± 0.3% typical of full scale, ± 0.5% max. of full scale
±1% maximum of full scale
Resolution
4µA = 8 counts
Update rate per module
0.3ms maximum
Channel-to-channel crosstalk rejection
70dB minimum
Output default
Hold Last State (default), 4mA (configurable)
†
In the presence of severe RF interference, (IEC 1000-4-3, 10V/m), accuracy may be degraded
to ±1%.
††
R
L(MAX)
= (V
EXTERNAL PS
– 4V) / 20.38mA