6. Adjust the orientation of the “operating
panel” in case of rackmount use: loosen
the 2 screws that hold the panel and
reinstall it in reversed position.
6
7. Assemble the plastic front panel (like in
3.3.2 step 5).
8. Using the DC socket of the battery pack
you can install a second, third, etc. pack.
See chapter 6 for more information.
8
fig. 3.3.4b: installing battery extension pack(s) to the UPS
modifications reserved
OPM_VHE_XXX_0K7_3K0_XGB_V010
10 User manual VH Series 700-3000 UPS 1.0 (GB)
To Next Page
Loading...
