GE MEDICAL SYSTEMS
D
IRECTION 2300164-100, REVISION 7 VIVID™ 3 PRO/VIVID™ 3 SERVICE MANUAL
3-76 Section 3-8 - Storing and Transporting the Unit
Section 3-9
Completing the Installation Paperwork
NOTE: On completion of a Vivid™ 3 ultrasound scanner installation, it is important to record the relevant
System Installation details (see
Table 3-22 below) and Product Locator Installation details (see Figure
3-50 on page 3-77
), for future reference.
3-9-1 System Installation Details
Enter the serial number printed on the main label (refer to the Main Label section, on page 1-15), and
the other relevant system installation details into the following table:
3-9-2 Product Locator Installation
NOTE: During and after installation, the documentation (i.e. User Manuals, Installation Manuals...) for the
peripheral units must be kept as part of the original system documentation. This will ensure that all
relevant safety and user information is available during the operation and service of the complete
system.
1) Verify that all details have been entered in the System Installation Details form, as described in the
System Installation Details section, above. If this form has not been completed, enter the details
now.
2) Locate the Product Locator Installation Card(s) that are affixed to the monitor and to each of the
peripherals, and fill in all details on both the front and back of the card(s) - see
Figure 3-50 on
page 3-77
.
Note: Step 2 may have been completed already by GE personnel.
The Product Locator Installation Card shown in
Figure 3-50 may not be identical to the
card(s) provided.
Table 3-22 System Installation Details
System S/N:
Location:
Date:
Customer Name:
Service Engineer’s Name:
Comments:
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
