Need help?Do you have a question about the GE VIVID 3 BT00 and is the answer not in the manual?
General| Category | Medical Equipment |
|---|---|
| Type | Ultrasound System |
| Manufacturer | GE Healthcare |
| Model | Vivid 3 BT00 |
| Power Requirements | 100-240 VAC, 50/60 Hz |
| Application | Cardiology |
| Display | 15-inch LCD |
Details conventions used in the manual, including model designations, icons, and safety messages.
Outlines essential safety precautions for operation, service, and repair of the equipment.
Identifies and describes labels and icons found on the Vivid 3N Pro/Expert ultrasound unit.
Explains electromagnetic compatibility, interference, and electrostatic discharge prevention measures.
Provides contact information and guidance for obtaining assistance or support.
Provides information for planning and preparing the installation of the Vivid 3N Pro/Expert ultrasound unit.
Details environmental, cooling, lighting, and power requirements for the ultrasound unit console.
Outlines purchaser responsibilities and mandatory site requirements for installation.
Introduces installation procedures and site preparation requirements for the Vivid 3N Pro/Expert.
Provides average installation times and important warnings for system setup.
Details procedures for receiving, unpacking, and inspecting the Vivid 3N Pro/Expert.
Covers confirming customer order, verifying shipping crate contents, and component inspection.
Provides instructions for connecting the footswitch, peripherals, and other hardware components.
Details the procedure for installing the application and operating system software.
Guides through adjusting display settings and configuring system parameters like Hospital Info.
Explains how to connect the system to various devices and networks using TCP/IP.
Provides instructions and precautions for storing and safely transporting the ultrasound unit.
Covers system installation details and product locator installation card completion.
Introduces functional checks for installation, servicing, and periodic maintenance of the Vivid 3N.
Covers power ON/OFF, boot-up tests, and diagnostic power supply testing.
Details tests for basic controls, keyboard, footswitch, speakers, and peripherals.
Provides procedures for testing image quality with various probes and modes.
Outlines checks for software configuration to ensure proper system handover.
Provides a template for logging service visits, problems, and comments.
Introduces block diagrams and functional explanations of the Vivid 3N electronic circuits.
Describes the Vivid 3N as a phased/linear array ultrasound scanner and its main functional blocks.
Includes system block diagrams and cabling diagrams for RFI and RFT configurations.
Details the components and functions of the Front End crate and its boards.
Explains the components and operation of the Back End Processor (BEP), the main controller.
Lists and describes the external peripherals used with the Vivid 3N ultrasound scanner.
Details the AC and DC voltage distribution throughout the system components.
Describes the components and airflow of the Vivid 3N Front End cooling system.
Introduces the Service Platform, its integration with iLinq, and its features.
Introduces procedures for adjusting system settings and performing calibrations.
Details how to configure AC input voltage settings for the unit.
Explains the status indicators (LEDs) and voltages for boards in the Front End Crate.
Describes the LEDs on the Mother Board indicating power supply status.
Guides on confirming video transmission signal settings for PAL or NTSC systems.
Provides instructions for adjusting monitor settings like geometry and image quality.
Details how to calibrate image quality settings for the Vivid 3N monitors.
Explains how to access calibration options, including Monitor, Beamformer, and Video Grabbing.
Introduces diagnostic tools for locating system problems and failures.
Describes diagnostic tools for checking system parts, power supplies, and board functions.
Provides detailed procedures for performing diagnostic tests on the Front End components.
Guides on testing the functionality of various Back End hardware components.
Explains the web-controlled user interface for accessing service components and diagnostics.
Details how the system logs software activity, sequences, and error messages.
Provides an overview of replacement procedures for system parts.
Details the procedures for removing and installing various unit covers.
Describes replacement procedures for components within the control console, like monitors and keyboards.
Provides instructions for replacing boards and components within the Front End crate.
Details procedures for replacing components within the Back End Processor.
Covers replacement procedures for components located in the lower section of the unit.
Explains the process of installing or upgrading system software.
Describes the installation and removal procedures for various external peripherals.
Provides an overview of replacement parts for the Vivid 3N Pro/Expert ultrasound unit.
Lists and defines abbreviations used throughout the manual.
Illustrates and lists optional service parts kits delivered with the unit.
Provides an overview of the AC power system and its components.
Lists parts associated with the control panel of the Vivid 3N ultrasound unit.
Details the part numbers and descriptions for Front End components.
Identifies the global modem kit used for remote servicing.
Lists part numbers and references for Back End components.
Provides diagrams and part numbers for various system cables.
Introduces Periodic Maintenance (PM) procedures for the Vivid 3N Pro/Expert system.
Explains the importance of maintaining records and quality assurance for PM.
Outlines the recommended frequency for performing PM procedures and items requiring attention.
Lists special tools, supplies, and equipment needed for periodic maintenance.
Details preliminary checks and system functional checks for periodic maintenance.
Covers procedures for checking, handling, cleaning, and sterilizing ultrasound probes.
Describes electrical safety tests based on NFPA 99 and IEC 60601-1 standards.
Discusses possible causes of excessive current leakage and troubleshooting steps.
Provides templates for documenting PM and electrical safety inspection results.
To Next Page
