GE MEDICAL SYSTEMS
D
IRECTION FK091075, REVISION 04 VIVID 3N PRO/EXPERT SERVICE MANUAL
3-8 Section 3-4 - Receiving the Vivid 3N Pro/Expert
3-4-3 Unpacking Vivid 3N Pro/Expert
We strongly advice you to store the packing materials in undamaged condition in case of future
transportation of the equipment.
Table 3-6 Unpacking Vivid 3N Pro/Expert
Step
Task
1.
Open the four hinges on each door and remove the doors.
One of the doors are used as ramp out off and into the transportation box.
On the first version of the Transportation Box, only the front door is meant to be used as a ramp. It has bevel cut in one
end.
2.
Place the front door as a ramp against the rear edge of the pallet.
3.
Carefully remove the accessory box, and any other items, including the wooden shelf above the scanners keyboard and
all the filling material, from the Transportation Box.
Front door bevel cut.
This end of the door
should be used as
the lower end of the
ramp.
On the second version transportation box, the ramp is placed
directly on the “labank” ends.
“Labank”
To Next Page
Loading...
