GE MEDICAL SYSTEMS
D
IRECTION 2300164-100, REVISION 7 VIVID™ 3 PRO/VIVID™ 3 SERVICE MANUAL
7-54 Section 7-3 - Performing Front End (FE) Diagnostics
7-3-9-3 Expanded Low Channels Diagnostic Tests
Tests output signals in CW-Mode only, when the input channels are connected to the output channels.
If one channel is missing, the output will be -6db. The input signals come from either a 3S or a 7S probe.
Figure 7-30 Expanded Low Channels Diagnostic Tests
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
