GE MEDICAL SYSTEMS
D
IRECTION 2300164-100, REVISION 7 VIVID™ 3 PRO/VIVID™ 3 SERVICE MANUAL
3-56 Section 3-7 - Connectivity Setup
5) Trackball to the Local Settings tab and press Select. The Local Settings tab is displayed, as
shown below.
Figure 3-38 Local Settings Tab
Note: The Computer Name field shows the serial number of your Vivid™ 3 system.
6) Enter the network information in the appropriate fields. Leave the User Name as vivid3.
Note: The Default Gateway option is not always required. If this address is not supplied by the
system administrator, leave it blank.
7) Trackball to the OK button and press Select. The following warning is displayed:
8) Trackball to the OK button and press Select. The system will reboot to activate the settings.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
