GE HEALTHCARE - KRETZTECHNIK VOLUSON® 730EXPERT (BT03)
D
IRECTION 105899, REVISION 3 DRAFT (APRIL 29, 2008) SERVICE MANUAL
3-36 Section 3-7 - Printer Installation
3-7-4 Adjustment of Printer Settings
1.) After system restart, touch the UTILITIES key, and then SYSTEM SETUP on the Touch Panel.
2.) Select the
SERVICE page. The “password window” appears automatically.
3.) Enter the password SHE and click the ACCEPT
button.
4.) Click on the PRINTER
button.
5.) Select the desired printer from the pull-down menu and click the EDIT SETTINGS
button.
6.) Confirm the warning message with the YES
button. The “Printer Properties” appear.
To adjust the Line printer see: Section 3-7-4-1 "HP 990cxi / HP 995c - Printer Settings" .
To adjust the Color printer see: Section 3-7-4-2 "UP-D21MD / UP-D23MD - Printer Settings" .
Figure 3-42 Select the desired printer
WARNINGWARNING
!! WARNING:
After each printer installation, the leakage currents have to be measured
acc. IEC 60601-1 resp. UL60601-1.
hp deskjet 990c
select the desired printer
from the pull-down menu
To Next Page
Loading...
