GE Voluson E10 User Manual

Warnings
Ultrasound System – Common Service Information 4-3
Direction 5444964-100 English Rev. 5
Warnings
Warnings
DANGER
WHERE APPLICABLE, THERE ARE SEVERAL PLACES ON
THE BACKPLANE, THE AC DISTRIBUTION, AND DC
DISTRIBUTION THAT ARE DANGEROUS. BE SURE TO
DISCONNECT THE ULTRASOUND SYSTEM POWER PLUG
AND OPEN THE MAIN CIRCUIT BREAKER BEFORE YOU
REMOVE ANY PARTS. BE CAUTIOUS WHENEVER POWER
IS STILL ON AND COVERS ARE REMOVED.
CAUTION
Practice good ESD prevention. Wear an anti–static strap when
handling electronic parts and even when disconnecting/
connecting cables.
CAUTION
Do not pull out or insert circuit boards while power is on.
CAUTION
Do not operate this Ultrasound system unless all board covers
and frame panels are securely in place. System performance
and cooling require this.
CAUTION
To ensure the mutual protection and safety of GE service
personnel and our customers, all equipment and work areas
must be clean and free of any hazardous contaminants before
a Service Engineer starts a repair. This includes, but is not
limited to, decontamination and/or sterilization, depending on
the application or use of the medical device.

GE Voluson E10 Specifications

General

Category	Ultrasound System
Touch Panel	Yes
Probe Ports	4 active probe ports
4D Imaging	Yes
e4D Technology	Yes
Power Requirements	100-240 V AC, 50/60 Hz
Type	Ultrasound System
Application	Obstetrics, Gynecology, General Imaging
Display Size	23 inch
Display Type	High-resolution
Imaging Modes	2D, 3D, 4D, Color Doppler, Power Doppler, M-Mode
Advanced Features	HDlive, SonoBiometry, Radiantflow
Advanced Probes	Yes, including volume and 4D probes
Transducer Frequency Range	1 MHz to 18 MHz
Ports	USB, HDMI, Ethernet
Operating System	Windows-based
Storage	USB storage support
Connectivity	DICOM, Ethernet, USB