7. Guide to Programming Charts
Select Utility
Select Measure set up
Select User 1/2/3 (not factory)
Select add
Ensure there is a space for chart (you may need to delete some first)
Select New
Select Ob Biometry
Select OK
Select measure name using drop down menu
Select Authors name
Select measurement tool i.e distance/area ellipse/2D area trace/ 2D points
Select appropriate unit i.e mm or cms
Select Fetal age or growth.- you will need to enter growth chart if you wish to have graphs
on the Ob report.
Select table (you can input a formula here if needed)
Select New
Select template
Select SD or growth percentile
Select edit table values
Fill in accordingly- you will need to highlight box and set to enter data.
Select + to add further rows
Select OK
Page 19 of 37
To Next Page
Loading...
