– 12 –
Pedestal Installation (Washer and Dryer)
Optional 12-in. high storage drawer pedestals with
dividers are available to provide convenience and
extra storage space for detergent, dryer sheets and
other cleaning supplies. The pedestal installation kit
includes 4 support pads, 4 mounting screws, and 4
leveling legs with locknuts.
Phillips-head Screwdriver
9/16" Open End Wrench
or Adjustable Wrench
8-mm Socket Wrench
Tools Needed
4 Support Pads
4 Mounting Screws
4 Leveling Legs
with Locknuts
Kit Contents
WARNING: Due to the size and weight of the
washer or dryer, and to reduce the risk of personal
injury or damage, 2 people are required for proper
installation.
Note:
DO NOT remove washer shipping bolts prior to
pedestal installation. Shipping bolts MUST be
reinstalled, if previously removed.
Care should always be taken when laying
the washer or dryer on its side to prevent
component damage.
Do not lay washer or dryer on its back. Use a
pad or protective surface when laying washer or
dryer on its side.
To install the pedestal:
Lay the washer or dryer on its side.
Remove the 4 leveling legs.
•
•
•
1.
2.
(Continued Next Page)
Back out and remove
all 4 leveling legs
To Next Page
Loading...
