GE WSLS1500H2WW - Water Valve; Water Valve Dispenser Box Removal

– 23 –
Water Valve
The water valve consists of a valve body and two
solenoid coils. It is only available as a complete
DVVHPEO\(DFKVROHQRLGFRQWUROVDVSHFL¿FZDWHU
function.
Water Valve Dispenser Box Removal
1. To access the water valve, the rear component
cover needs to be removed. (See Rear
Component Cover Removal for instructions).
NOTE: The water valve is attached to the
dispenser box and will need to be removed
together.
2. Remove the detergent dispenser drawer from
the box. Slide the drawer all the way out and lift
it slightly to remove.
3. Disconnect the harness connecters from the
water valve.
4. Remove the Philips head screw that secures the
water valve and dispenser box to the top cover.
5. :LWKDÀDWEODGHVFUHZGULYHUSXVKWKHKROG
down clip away from the box.
Fill System