GE WSLS1500H2WW - Brake Adjustment; Brake Lever Adjustment

– 36 –
NOTE: If the plastic spring retainer is not damaged,
do not remove. The sealant that is used makes it
hard to remove and it may break in the process. But
if it does need to be replaced, go to step 4.
4. Remove the two 8 mm bolts securing the plastic
VSULQJUHWDLQHUWRWKHSODWIRUPDQGVOLGHRȺRI
the tub drain tube.
Brake Adjustment
Brake Lever Adjustment
If the basket does not stop spinning when the lid
is opened, or if the brake and/or clutch lever or
adjustment screw have been replaced, follow the
brake adjustment instructions below.
1. Loosen the adjustment screw lock nut. Turn the
adjustment screw to a space between the tip
of the screw and the brake lever of 5/64th of an
inch.
2. Keep the clearance between the brake lever
and the P.V. link (Plunger Valve) between 5/64th -
9/64th of an inch.