GE
Sensing & Inspection Technologies Remote Visual Inspection
XL Vu
™
Quick Start Guide
System Removal
Carefully remove insertion tube and
handset from storage case.
System Power On
Plug AC power supply into a suitable outlet.
Momentarily press and release Power/Exit.
Buttons and LCD will light up and begin power-up
sequence. After a brief period, the system screen
will display live video and screen prompts.
The system is now ready for use.
WARNING: Do not allow the conductive insertion tube, system or its
working tools to come in direct contact with any voltage or current source.
Prevent all contact with live electrical conductors or terminals. Damage to
the equipment and/or electrical shock to the operator may result.
To Next Page
Need help?
General
