GE Druck DPI 620-IS User Manual

Page 1 of 98 K0460 Issue 1
CERTIFICATE RELATED DRAWING
NOT TO BE MODIFIED WITHOUT
T
HE APPROVAL OF THE CERTIFICATION ENGINEER
DPI 620-IS
Advanced Modular Calibrator
User Manual
K0460
Pressure measurement
for research & industry
Druck Limited
Fir Tree Lane
Groby
Leicester LE6 0FH
England
Tel: 0116 231 7100
APPROVED: M T CONCANNON
CE
RTIFICATES: Baseefa10ATEX0010X
Baseefa10ATEX0012X
IECEx BAS 10.0002X
IECEx BAS 10.0004X

Druck Limited 2010
This document is the property of Druck Limited and may not, either in part or whole, be copied or otherwise rep
roduced,
communicated in any way to third parties, nor stored in any data processing system, without the express written authority of
Druck Limited.

GE Druck DPI 620-IS Specifications

General

Ingress Protection	IP54
HART Communication	Yes
Operating Temperature	-10°C to +50°C
Pressure Range	Depends on module (e.g., -1 to 20 bar)
Pressure Measurement Accuracy	±0.025% of full scale
Display	Color graphic LCD
Battery Life	8 hours typical
Electrical Measurement	Voltage, current, resistance, frequency
Intrinsically Safe	Yes (ATEX and IECEx)
Power Supply	Rechargeable Li-ion battery or external power
Communication Interface	USB
Dimensions	60 mm

Summary

Quick reference data

A1.1 DPI 620-IS: Channel 1 (CH1)

Quick reference for Channel 1 capabilities, including measure, source, and power functions.

A1.2 DPI 620-IS: Channel 2 (CH2)

Quick reference for Channel 2 capabilities, including measure, source, and power functions.

A1.3 DPI 620-IS + MC 620-IS + PM 620-IS

Quick reference for combined DPI 620-IS, MC 620-IS, and PM 620-IS module operations.

Safety

General warnings

General safety precautions and warnings for instrument use.

Electrical warnings

Specific warnings related to electrical safety and connections.

Pressure warnings

Specific warnings related to pressure measurements and connections.

Cautions

Overview

DPI 620-IS

Description of the Advanced Modular Calibrator (AMC) DPI 620-IS.

MC 620-IS

Description of the Pressure Module Carrier (MC 620-IS).

PM 620-IS

PV 62x-IS

Summary of functions

DPI 620-IS - Calibrator functions

Summary of the various functions and capabilities of the DPI 620-IS calibrator.

Chapter 3: Electrical and IDOS operations

Chapter 6: Datalog operation

6.2 Set-up

Chapter 8: HART® device operations

8.2 About HART

Chapter 11: General specification

Chapter 1: Instrument parts, accessories and options

1.2 The instrument

1.3 The display

1.4 Accessories

Chapter 2: Prepare the instrument

2.4 Power supply

Information regarding the instrument's battery-powered operation.

2.5 The battery

2.5.1 Battery condition

2.5.2 Install the battery

2.5.3 Charge the battery

2.5.4 Charge times

2.5.5 Operating time

2.6 Power on or off

2.7 Display operation

2.8 Menu sequence

2.8.1 Procedure to set the basic operations

2.8.2 Procedure to see the instrument status

2.8.3 Procedures to make Task selections

2.9 Measure and source operations

2.9.1 Set the Process options (measure)

How to configure process options for measure functions.

2.9.2 Set the Automation options (source)

How to configure automation options for source functions.

2.10 The Advanced menu options

2.10.1 Advanced: Calibration options

Accessing advanced options for instrument calibration.

2.10.2 Advanced Setup options

Chapter 3: Electrical operations

3.2 Measure and source operations

Procedures for measuring and sourcing electrical values.

Chapter 4: Pressure indicator operation (MC 620-IS)

4.4 Measure pressure

Chapter 5: Instrument communications

5.2 Connect to a computer (USB)

Chapter 7: Documenting functions

7.2 Analysis

7.3 Run a procedure

8.3 HART® Connections

Chapter 10: Calibration procedures

10.2 Before starting

Steps and equipment required before starting an accurate calibration.

10.3 Selection sequence