Issue 1
vi Summary of functions K0460 - [EN] English
Software (this user manual): The DPI 620-IS calibrator
includes the following software:
Other accessories and options: For part numbers (P/N),
refer to Section 1.4 (Accessories).
Summary of
functions
This table gives a summary of the available functions with the
DPI 620-IS calibrator.
• documenting software • HART® communications software
DPI 620-IS - Calibrator functions
Function
Easy to read, Active Matrix Organic Light Emitting Diode Display in colour.
No keys: the touch-screen has large buttons for finger operation.
Rechargeable NiMH battery with enhanced power control for prolonged
battery life.
*
Measure current (mA), voltage (Volts/mV), frequency (Hz/pulse count).
* Supply current (mA), voltage (Volts/mV), frequency (Hz/pulse count).
* Measure/simulate:
- a Resistance Temperature Detector (RTD): Ω or °C/°F
- a thermocouple (TC): mV or °C/°F
- a resistor (Ω)
Cold Junction (CJ) compensation: Automatic/Manual.
Step/Ramp functions: Automatic/Manual.
Switch test and condition indicator (open/closed).
Language selection (see Section 2.8 (Menu sequence)).
Universal Serial Bus (USB) communications ports: For computer
communications, external modules.
† Windows
®
CE operating system.
** Measure pressure/Leak test: See pressure accessories.
Documenting software to give an analysis of a device calibration.
Set-up function to save and recall personal settings, instrument calibration
settings and other standard instrument operations.
To Next Page
Loading...
