To Next PageTo Next Page
Need help?Do you have a question about the GE Druck DPI611 and is the answer not in the manual?
General| Type | Pressure Calibrator |
|---|---|
| Pressure Range | -1 to 20 bar / -14.5 to 300 psi |
| Accuracy | ±0.025% of full scale |
| Resolution | 0.001 bar / 0.01 psi |
| Pressure Units | psi, bar, mbar, kPa, MPa, inHg, mmHg |
| Pressure Media | Non-corrosive gases |
| Display | LCD |
| Power Supply | Rechargeable battery or external power supply |
| Operating Temperature | 0 to 50°C (32 to 122°F) |
| Storage Temperature | -20 to 70 °C |
| Communication Interface | RS232 |
| Certifications | CE |
Details essential safety measures and regulations for operating the instrument.
Method to check the current software and firmware versions installed on the DPI611.
Steps to download and install software or firmware updates for the DPI611.
Guidelines for safely cleaning the DPI611 instrument without using abrasive materials.
Step-by-step guide to accessing and selecting calibration functions on the DPI611.
Details on available utilities like Max/Min/Avg, Switch Test, and Relief Valve for functions.
How to configure and perform a leak test to calculate system leakage.
Configuration steps for data logging, including filename, trigger, and period settings.
Options for managing logged data files, including transfer, erase, and memory status.
Using the Analysis function to calibrate transfer characteristics of devices under test.
How to execute calibration procedures downloaded from 4 Sight software.
Procedure for comparing instrument readings against a known pressure standard.
Detailed steps for calibrating the current measure function of the DPI611.
