Page 43 of 79 [EN] English – K0571 Issue 1
User Manual Druck DPI611
Figure 2-17 Calibration Window - Expanded View
The display options can be changed by pressing the channel
the user wants to display in expanded view.
Selecting displays all channels in the reduced view.
2.2.4 Example Procedures
a. Example Procedure: Measure or Source Current with
internal loop power
• Figure 2-18 shows CH1 set-up to measure or source a
current with internal loop power.
Note: Loop drive is provided by connecting to the 2 red
terminals on the front of the DPI611 and enabling
Current (24V) as the electrical function.
To Next Page
Loading...
