GE Druck DPI611

Page 52 of 79 [EN] English – K0571 Issue 1
User Manual Druck DPI611
2.4 MEASURE PRESSURE: IDOS Option
Optional item, An IDOS Universal Pressure Module (UPM) uses
Intelligent Digital Output Sensor (IDOS) technology to measure the
applied pressure and supply the data to an IDOS instrument. Before
using an IDOS module, (Ref: User Manual: K0378, Druck IDOS UPM).
Note: To attach an IDOS module to the Druck DPI611
use an IO620-IDOS-USB adaptor.
Figure 2-26 IDOS Module
2.4.1 IDOS Option Assembly Instructions
Table 2-4
Step Procedure
1
Attach one end of the adaptor IO620
-
IDOS
-
USB to the
IDOS module
2
Push the Type A end of USB Cable into the USB socket
on the instrument and the type B end into the adaptor
(IO620-IDOS-USB)
3
Set the instrument power on
When this symbol flashes at the top of the display, it
shows there is communication between the IDOS
module and the calibrator