Page 65 of 79 [EN] English – K0571 Issue 1
User Manual Druck DPI611
4.4 RUN PROCEDURE
The purpose of the Run procedure is to do calibration procedures
which have been downloaded from 4 Sight software. The 4 Sight
calibration procedures contain all the values to calibrate a device
under test (test points, ramp time).
The same calibration procedure can be used for all the applicable
devices under test. To use the Run Procedure function, the following
items are required:
• A copy of the 4 Sight Calibration Software.
• Standard USB lead (as supplied).
• A Druck DPI611 calibrator device driver available as a
download from the website www.ge-mcs.com.
To Next Page
Loading...
