GE Druck DPI611

Page 14 of 79 [EN] English – K0571 Issue 1
User Manual Druck DPI611
Table 1-2
1.9.1 Test Port
To attach the device under test, the test
port uses “Quick fit” pressure adaptors;
See Section 1.11. These are easy to
remove, change and install; See Section
2.1.3 (Attach/Remove the device under
test).
1
ON
or
OFF
but
ton.
2
Pump mechanism and pressure/vacuum selector.
3
Pneumatic volume adjuster.
4
Test port: To
attach the device under test.
5
Pneumatic pressure release valve to release pressure in the
system.
6
Electrical
connectors for: Voltage
Measure
(V);
Current (mA+, mA-); Switch Operation.
7
Isolated
electrical
connectors for:
Voltage
Source (10 Vo)
;
24 V loop power supply (24 Vo).
8
Liquid Crystal Display (LCD): Color display with touch
-
screen. To make a selection, lightly tap on the applicable
display area.
9
+5 V DC power input socket.
10
USB type A connector for connections to external
peripherals (USB flash memory or optional external
modules).
11
USB mini
-
type B connector for communication with a
computer.
Figure 1-3
Test port