Page 38 of 79 [EN] English – K0571 Issue 1
User Manual Druck DPI611
• UTILITY selects the required utility (See Section
2.2.2 for details).
• CAPTION allows the user to change the
caption, if required.
• CAPTION RESET allows the user to reset the
caption.
• Once all settings have been selected, press
the button at the bottom of the screen to return
to the TASK SETTINGS screen.
• Please note for the settings to be set the user
must also press the button in the TASK
SETTINGS menu.
• Repeat the above if another channel is
required.
2.2.2 Set the Function Utility Options
For each function only one utility may be active. Not all source and
measure functions have associated utilities. For all options, the
button resets the additional readings.
a. Max/Min. Avg
This utility is only available with measure functions.
The additional values displayed show the minimum, maximum, and
average values of the input signal.
To Next Page
Loading...
