Page 37 of 79 [EN] English – K0571 Issue 1
User Manual Druck DPI611
Figure 2-11 Channel Settings Menu
III. Setup a channel for measurement
• DIRECTION selects Source or
measure for the selected function.
• FUNCTION selects the function required
(E.g.: Current or Voltage). For more options, scroll
down the menu by swiping the display from
bottom to top.
• UNITS selects the type of unit required, (E.g:
Volts, Amps), please note that there may only be 1
type of unit available in particular Functions.
To Next Page
Loading...
