Page 12 of 79 [EN] English – K0571 Issue 1
User Manual Druck DPI611
• Remove the plastic film that protects the display.
1.8.2 Install the Battery
• Remove the battery cover by loosening the captive
battery cover fixing screw and lifting the cover
upwards.
• Place the batteries in the battery compartment with
the correct +/– position.
• Replace the battery cover by pressing the lugs inside
the slots (A) and bring down the cover, securing by
tightening the fixing screw. (See Figure 1-1).
Figure 1-1 Battery Cover Insert
To Next Page
Loading...
