GE Druck DPI611

Page 7 of 79 [EN] English – K0571 Issue 1
User Manual Druck DPI611
1 INTRODUCTION
The Druck DPI611 is a battery-powered instrument for performing
pressure and electrical calibration operations. The Druck DPI611 also
supplies the power and user interface functions for all optional items.
1.1 EQUIPMENT IN THE BOX
The following items are supplied with the Druck DPI611:
• Standard AA size batteries
• 1/8” NPT & BSP pressure adaptors
• Set of four test leads
• Safety and Quick Start Guide
• Stylus
1.2 OBSERVANCE OF THE USER MANUAL
This manual contains safety and battery installation information for
the Druck DPI611. It is the responsibility of the customer, to make sure
that all personnel operating and maintaining the equipment are
correctly trained and qualified. Before operating or using the
equipment read and obey all sections, including all WARNINGS and
CAUTIONS given in the Quick Start Guide.
1.3 GENERAL SAFETY PRECAUTIONS
Read and obey all the operator's local health and safety regulations
and safe working procedures or practices. When doing a procedure or
task.
• Use only the approved tools, consumable materials and
spares to operate and maintain the equipment.
• Read and obey all applicable WARNING signs.