Page 25 of 79 [EN] English – K0571 Issue 1
User Manual Druck DPI611
1.15.1 Cleaning
Do not use solvents or abrasive materials.
Clean the case and display with a lint-free cloth
and a weak detergent solution.
1.15.2 Replace the Batteries
To replace the batteries, See Section 1.8.2. Then re-attach
the cover.
All the configuration options stay in memory.
1.16 INSTRUMENT RETURN
1.16.1 Returned Material Procedure
If the instrument is unserviceable and requires a repair
return to a GE Service Center or approved Service Agents.
Web site: www.ge-mcs.com
Contact the GE Service Center, either by phone, fax or
E-mail to obtain a Returned Material Authorization (RMA)
number, providing the following information:
• Product (i.e. Druck DPI611)
• Serial number
• Details of defect/work to be undertaken
• Operating conditions
1.16.2 Safety Precautions
Provide information if the product has been in contact with
any hazardous or toxic substances and, the relevant MSDS
To Next Page
Loading...
