Page 55 of 79 [EN] English – K0571 Issue 1
User Manual Druck DPI611
This chapter describes how to use the Data Logging function to log
data to a file.
In Data Logging mode the display data from all active channels is
stored at each data point.
The data can be stored:
• Periodically
• Key press
The data is stored in the internal memory or on a USB Flash Drive
connected to the Unit until the Data Logging is stopped.
3.1 SET-UP
Before starting, set all channels to the correct functions. (See Chapter
OPERATIONS). To access the Data logging function do the following:
DASHBOARD >> DATA LOGGING>> SETUP
To Next Page
Loading...
