Page 57 of 79 [EN] English – K0571 Issue 1
User Manual Druck DPI611
To start Data Logging Mode:
1. Select appropriate options and enter filename for Data Log
file.
Note: When entering filename it is first necessary to select
destination (INTERNAL or USB FLASH DRIVE)
2. Select the button.
3.2 OPERATION
In periodic mode, to begin data logging tap ‘Start logging’
button.
In Key press mode, a data point is taken every time the user taps the
log button
To stop Data Logging select
The data logging indicator flashes to indicate whenever a
reading is logged.
3.3 FILE REVIEW
DASHBOARD >> DATA LOGGING>> RECALL
To view a data file point by point do the following:
1. Tap the Filename button to display the list of data files.
2. Select the file to be displayed.
3. Tap to see the data display.
4. To step the display one data point, tap the Next Log
button
.
Note: The data point number sequence is displayed in the
top right-hand corner (e.g. 4 of 100).
To Next Page
Loading...
