GE Druck DPI611

Page 63 of 79 [EN] English – K0571 Issue 1
User Manual Druck DPI611
4.2.2 Define each Input Channel
Tap each Input channel button to set the Input options.
Figure 4-2 Select Input Options
SCALING The scaling values are two pairs of values that
define the ideal transfer characteristic:
The maximum and minimum Reference signal values
(Reference High and Reference Low) and the
corresponding Input signal values (Input High and
Input Low).
ERROR TYPE - Selects how the deviation from the ideal transfer
characteristic is to be displayed. This can be one of
the following:
% Span - a percentage of the Input signal span.
% Rdg - a percentage of the Input signal reading.