Page 23 of 79 [EN] English – K0571 Issue 1
User Manual Druck DPI611
Note: If the software revision number is highlighted red then
an upgrade is available.
1.14.2 Upgrading the Software
Follow the website instructions to download the files onto a
USB flash memory drive.
www.ge-mcs.com
DASHBOARD >> SETTINGS
>> ADVANCED
Enter the calibration PIN: 5487; Select the button and
continue upgrade with one of these operations.
1.14.3 Upgrade the Application Software
1. Copy the ‘AMC’ application folder into the root of a
USB flash memory device.
2. Put the USB flash memory drive into the USB type A
connector.
3. Select:
4. Follow the on-screen instructions.
1.14.4 Upgrade the Operating System and Boot Loader Software.
1. Copy the ‘OS’ folder into the root of a USB flash
memory device.
2. Put the USB flash memory drive in the USB type A
connector.
3. Select:
To Next Page
Loading...
