GE Druck DPI611

Page 48 of 79 [EN] English – K0571 Issue 1
User Manual Druck DPI611
Figure 2-23 Measure DC Volts (10V) or DC mV (10V) on CH1
1. Set the applicable software options.
2. Complete the electrical connections and continue
with the measure operation.
2.3 PRESSURE CALIBRATION
PRESSURE TASKS are available in the TASK MENU. See Section 2.2.1
Basic Calibrator Operation for details.
Select the required function by touching either the appropriate text or
diagram. The DPI611 will set the functions and return to the
CALIBRATOR screen.
Pressure Functions can also be selected through the CUSTOM TASK
function. See Section 2.2.1 for details.
If required, change the Units or the function. If necessary, set a Utility
for the function:
• Max/Min/Avg
• Switch Test
• Relief valve
• Leak Test