Page 44 of 79 [EN] English – K0571 Issue 1
User Manual Druck DPI611
Figure 2-18 Measure current on CH1. Range ± 55 mA
1. Set the applicable software options.
2. Complete the electrical connections and continue
with the measure or source operation.
3. Source only (Automation). Set the applicable output
value.
b. Example Procedure: Measure Voltage
• Figure 2-19 shows CH1 set-up to measure a DC voltage
(± 30 V) or DC mV (± 2000 mV).
Figure 2-19 Measure DC Volts or DC mV on CH1.
To Next Page
Loading...
