Page 45 of 79 [EN] English – K0571 Issue 1
User Manual Druck DPI611
1. Set the applicable software options.
2. Complete the electrical connections and continue
with the measure operation.
c. Example Procedure: Measure or Source Current with
External Loop drive
• Figure 2-20 and Figure 2-21 show how to set-up to
measure (±55mA) or source (0 to 24mA) a current with
external loop power.
Figure 2-20 Measure current with external loop power (Range: ±55mA)
To Next Page
Loading...
