[EN] English - K0460 Instrument parts, accessories and options 1-1
Chapter 1: Instrument parts,
accessories and options
1.1 Introduction
This chapter gives a description of the different parts of the
instrument and the accessories/options available.
1.2 The instrument
1. On or off button. Refer to “Quick Reference”.
2. CH1 Connectors for Channel 1
CH2 Connectors channel 2
3. USB Connector.
4. Display screen.
1
2
4
Figure 1-1: General view of
the instrument
3
2a Channel 1 (CH1) connectors for:
V: volts/mV DC; Hz: frequency and counts/min, counts/hour
(cpm/cph);
Ω: resistance; RTD: 2-wire, 3-wire (3W), 4-wire (4W)
resistance temperature detectors; : switch operation; mA+,
mA-: current. Refer to Chapter 3 (Electrical operations).
2b Channel 1 (CH1) connectors for thermocouples (TC). Refer to
Chapter 3.
2c Isolated channel 2 (CH2) connectors for:
V: volts/mV DC; mA+, mA-: current; 24Vo: 24V loop power supply;
: switch operation; refer to Chapter 3. For HART connections,
refer to Chapter 8.
Figure 1-2: CH1/CH2
connections
2 b ca
To Next Page
Loading...
